- Weight:
- 3.76 Pounds
- Mask Frame:
- High impact plastic
- Lens:
- Clear polycarbonate
- O-Rings:
- Buna-N
- The SuperMask, purchased with a SuperFlow 2nd stage demand regulator. If your mask was not supplied with a KMDSI regulator installed by the factory, you will need to have an acceptable regulator installed in the pod on your M-48.
- CR Standards:
- These masks meet or exceeds all standards established by Dive Lab of Panama City, Florida, and are CR (Commercially Rated) marked.
- Surface-Supplied Open Circuit:
- The SuperMask can be used for surface-supplied diving when used with a surface-supplied diving system. When using the KMDSI SuperFlow second stage, the mask can be used to depths of 130 FSW (39 msw) when supplied with an air source capable of delivering at least 4.5 actual cubic feet of air per minute (acfm) (127 alpm) to the diver worn manifold assembly. An ordinary scuba regulator first stage connected to a diving cylinder on the surface with a long hose to the mask is not an acceptable arrangement for this purpose, no matter what type of regulator is used.
The mask should only be used for surface-supplied diving by divers trained and qualified in surface-supplied techniques and procedures. A fully functional emergency gas supply system and body harness must always be used when diving the SuperMask or any of the KMDSI full-face masks models in the surface-supplied mode. When using this mask in countries that conform to CE standards the mask must only be used with components that have been CE certified. The maximum recommended recreational diving depth for the SuperMask with open circuit scuba is 130 FSW (39 msw).
|
